Danh mục sản phẩm

NHÀ CUNG CẤP

Danh mục sản phẩm > > Tival Sensors > Electronic pump control EPS-MT

Electronic pump control EPS-MT

Mã sản phẩm: EPS-MT
Nhà Sản Xuất:

Tival-sensors

Tài liệu hướng dẫn Download
Application
Booster stations
Domestic waterworks
Garden pumps
Sprinkle irrigation units
Water system applications

Mode of operation
The electronic pump control EPS-MT combines the
function of both pressure switch and flow-control (dry
running protection) in one unit. The EPS-MT controls
and protects AC-powered pumps convincingly.
The application range is limited to pumps with a max.
pressure of up to 10 bar, for higher operating pressures a pressure-reducing regulator has to be installed
on the intake side.The readiness for operation is indicated by a green LED. Failures are displayed by a
red LED.
Directly after connection to the electrical power supply
the pump will start automatically and the EPS-MT will
imediately take over the control function. If the piping
system is under pressure, but no flow is detected, the
EPS-MT will cut off the pump after a short time delay.If
the system pressure decreases below the preadjusted
start-up pressure (factory setting 1,5 bar) the pump
will restart. In case of no pressure and flow is detected
after the pump restart, the EPS-MT will identify this
status within short time as „dry running“ and switch
off the pump.
At frequent intervals of 60 minutes the pump control
automatically checks for sufficient amount of water in
the system. If enough water is detected, the EPS-MT
will reset to normal operating modus. After four repeating attempts without sufficient water in the system
the pump control finally performs the troublecode
„dry-running“ and must then be resetted manually. The
system pressure is displayed by the integrated bolt-on
manometer.

Liên Hệ Trực Tuyến

Tel: (08) - 6675.2925

(08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0934.101.781

kd3@cntruongthanh.com



SẢN PHẨM CHÍNH
martens
lenord-bauer
bamo-ier
elobau
tival-sensors

Cảm Biến - Sensor

Lượt truy cập



TRUONG THANH INDUSTRIAL CO., LTD.
29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-6675.2925      Fax: 08-3511.7931
Email: kd3@cntruongthanh.com
Hotline: 0934.101.781
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H
www.cntruongthanh.com