Danh mục sản phẩm

NHÀ CUNG CẤP

Danh mục sản phẩm > > Imtron > ISO-DP Digitised Electrical Insulation

ISO-DP Digitised Electrical Insulation

Mã sản phẩm: ISO-DP
Nhà Sản Xuất:

Imtron

Tài liệu hướng dẫn Download
This 19“ plug-in module called ISO-DP is
used for electrical insulation of signals, and
has been developed to meet highest
demands where precision and signal
frequency is concerned.
DP stands for Digital Potential insulation,
which indicates already the basic
difference to other insulation modules. The
signal is digitalised by means of a 16 bit
AD converter, then electrically insulated
with the help of an optocoupler, and finally
transformed back to its analog value with a
16 bit DA converter.
This technology assures extremely good
characteristic values with regard to offset
and accuracy drift, signal-to-noise ratio,
and harmonic distortion factor.

Features:

Electrical insulation at the input side
Up to 8 gain values (standard 3) can be selected with a rotary switch at the front
panel
AC / DC coupling selectable with a switch at the front panel
Input and output via BNC sockets at the front panel
AD and DA converter pulse synchronised with central master clock
Bipolar inputs and outputs, signal level: ± 10 V
Two internal sample rates: 140 kHz for exceptional stability, and 200 kHz for
high signal frequencies with minimum harmonic distortion

Differential or single ended inputs (please specify with order)
Flexible filter characteristics with plug-in filter modules (SIP); input filter (antialiasing) and output filter as plug-in filter (standard Butterworth 4th order), 2 SIP
sockets at the output side allowing an 8th order low-pass or a band-pass filter
Overload LED indicates overflow
Optional power supply for AC coupled
sensors (up to approx. 20 mA)
Modules optional available in rugged
19“ housings


» Imtron - Test Standard: 0 VND (Test Standard)
» Imtron - LM-02: 0 VND (LM-02)
» Imtron - Interbus System: 0 VND (Interbus)
» Imtron - DMS Calibrator  IEEE 488: 0 VND ( IEEE 488)
» Imtron - AS-2K AS-4K: 0 VND (AS-2K AS-4K)
» Imtron - Akustik- und Schwingungsmesstechnik: 0 VND (Akustik- und Schwingungsmesstechnik)
» Imtron - CAN Interface Module: 0 VND (CAN Interface Module)
Liên Hệ Trực Tuyến

Tel: (08) - 6675.2925

(08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0934.101.781

kd3@cntruongthanh.com



SẢN PHẨM CHÍNH
martens
lenord-bauer
bamo-ier
elobau
tival-sensors

Cảm Biến - Sensor

Lượt truy cập



TRUONG THANH INDUSTRIAL CO., LTD.
29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-6675.2925      Fax: 08-3511.7931
Email: kd3@cntruongthanh.com
Hotline: 0934.101.781
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H
www.cntruongthanh.com