Danh mục sản phẩm


Danh mục sản phẩm > > Honsberg > Flow Meter / Switch / IndicatorOMNI-HD1K / -HD2K

Flow Meter / Switch / IndicatorOMNI-HD1K / -HD2K

Mã sản phẩm: OMNI-HD1K / OMNI-HD2K
Nhà Sản Xuất:


Tài liệu hướng dẫn Download
● 0/4..20 mA or 0/2..10 V output signal
● 2 x programmable switches (push-pull)
● Backlit graphical LCD-Display (transreflective), can be read
in sunlight and in the dark
● Programmable parameters via rotatable, removable ring
(programming protection)
● All metal housing with scratch and chemical resistant
● Unit is displayed (selectable)
● Rotatable electronic head for best reading position
● Parameter interface

The electronics can be used on the spot to set switching values
where process values are exceeded or fallen short of. This setting
can be carried out via the display even without a process. The
present values or error messages from the measuring point are
visible at any time, and all major parameters can be accessed on
the spot. The analog current signal can be evaluated from large
distances, and the present values can be made available there. If
desired, the sensor can be configured at the factory with your
parameters. It is therefore ready for immediate use, without
programming. If you wish to change parameters, you can set the
device directly at the sensor, by means of the programming ring.
The entire family of OMNI sensors is made up in a modular way, by
means of a building-block system (hardware and software). A 16-bit
microcontroller with a 14-bit A/D converter and a 12-bit D/A
converter ensure the necessary processing speed and accuracy.
The signal is displayed with the unit of measure by a backlit LCD
graphical display, and is converted into a 0/4..20 mA signal. Two
switching values with a choice of PNP or NPN output can be
programmed across the whole range. The hystereses of the
switching values can be set separately in value and direction (min.,
max. switching value).
Exceeding or falling short of switching values, and error messages,
are indicated by a flashing red LED visible from a long distance,
together with a message in the display.
Further parameters can be modified by means of a code:
Signal filter, selectable unit (l/min, m3
/h ...) incl. automatic
conversion of the values, selectable output 0..20 mA, 4..20 mA,
0..10 V or 2..10 V, value assignment of 0/4..20 mA or 0/2..10 V
(setting of zero point and range).

» Honsberg - Flow Meter GR-150GK: 0 VND (GR-150GK)
» Honsberg - Flow Meter GKL: 0 VND (GKL-025..050G / M)
» Honsberg - Flow Transmitter / Switch FLEX-XF: 0 VND (FLEX-XF)
» Honsberg - Flow Switch UB1: 0 VND (UB1-025HM / K ; UB1-032EM / K)
» Honsberg - Flow Indicator / Switch NH1: 0 VND (NH1)
» Honsberg - KM-...A: 0 VND (KM-...A)
» Honsberg - Flow Indicator HV: 0 VND (HV-008..025GM)
Liên Hệ Trực Tuyến

Tel: (08) - 6675.2925

(08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0934.101.781



Cảm Biến - Sensor

Lượt truy cập

29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-6675.2925      Fax: 08-3511.7931
Email: kd3@cntruongthanh.com
Hotline: 0934.101.781
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H