Danh mục sản phẩm

NHÀ CUNG CẤP

Danh mục sản phẩm > > Bamo IER > BCP 48, Programmable counte

BCP 48, Programmable counte

Mã sản phẩm: BCP 48
Nhà Sản Xuất:

Bamo

Tài liệu hướng dẫn Download

DESCRIPTION
The BCP48 is a meter in a DIN 48 x 48 presentation.
During the design of this product, a particular attention was done to the comfort and ease of use.
Double display LCD back-lighted allows the simultaneous display of:

The current value (Upper display 7 mm high)
Choice between the pre-selected values P1, P2, Total or auxiliary metre (lower display 4 mm high)
The modification of a parameter or a preset value, are easily done with a 4 ways index. It allows a rapid selection to the programme step desired.
A processing cycle can be started or interrupted from a distance switch.
Compact, universal and easy to use, the BCP 48 gives you solution for metering and dosing process.


TECHNICAL CHARACTERISTICS
Main supply: Bivoltage 115-230 Vac 10% (other on request)
Sensor supply: 12 to 26 V DC under 60 mA maxi.
Display: 2 lines, 7 back-lighted segment 6 digits.
Frequency: 10 KHz maxi.
Input: PNP, NPN, Namur.
Factor: between 0,0001 and 9999,99
Impedance: 3 kΩ.
Consumption: 6 VA.
Relay output: 2 programmable contacts NO or NC
Power rating: 150 VA / 260 V AC / 1 A (protection: varistance 300 V)
Program: on EEPROM (10 years)
Protection: front panel IP65

Temperature limits:
- working 0 to 50°C
- stock -20 to +70°C

Mass: 260 g
Connections : 2 removable wiring connector


Liên Hệ Trực Tuyến

Tel: (08) - 6675.2925

(08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0934.101.781

kd3@cntruongthanh.com



SẢN PHẨM CHÍNH
martens
lenord-bauer
bamo-ier
elobau
tival-sensors

Cảm Biến - Sensor

Lượt truy cập



TRUONG THANH INDUSTRIAL CO., LTD.
29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-6675.2925      Fax: 08-3511.7931
Email: kd3@cntruongthanh.com
Hotline: 0934.101.781
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H
www.cntruongthanh.com